Back to Recapping

Amiga CD32 Recapping Service (Standard)


Amiga CD32 capacitor replacement service, all board revisions (Rev 3 & 4). NOTE this is NOT a repair service.

  • Check of the board before recapping is begun.
  • Removal of existing capacitors (both SMD and radial capacitors).
  • Cleanup and preparation of area.
  • Replace using Panasonic capacitors. NOTE: Rev 3 board capacitors C408 and C411 installed correctly.
  • Retest (Video, Audio, Floppy Boot, CF Card boot)
  • FREE return postage of your recapped board.

Full details of this recapping service is under the description tab below.

Preparing your board for postage:

All that needs to be sent is the mainboard (with or without its metal shielding), this should be placed in an Antistatic bag or newspaper (some plastic can conduct). Place this in a secure box with padding added bubble wrap is fine or crushed newspaper.

Make sure you put a note in the box to state who its from, return address and a printed copy of your order, if you don’t have a printer write down the order number on the piece of paper.



SKU: Amiga32R Categories: , Tags: , , ,


What is recapping?

As the Amiga computer age the capacitors will be prone to leaking over time, remember these are 20 plus years old so it’s a good preventative measure to replace the capacitors as once they leak they will eat through the copper circuitry and cause either permanent damage or an expensive repair job. click this link to read a more detailed explanation.

So in short what issues could cause:

  • Sound problems
  • Random rebooting
  • Guru Errors
  • Non booting
  • Floppy fails to work & then black screen.
  • Slow switching on


Whats included in the service (Detailed)?

Check of the board before recapping is begun

Before any work is started a full board check is done, if there are faults found i will contact you before recapping is done.

Removal of existing capacitors (both SMD and radial capacitors)

Professional tools and methods are used in removing capacitors, especially SMD components so either hot air or soldering tweezers are used, along with materials like solder flux are used to aid removal. this by far is the best way to remove the capacitors as you don’t add any stress to the solder pads underneath (if using other methods you risk pulling up a solder pad and some of the track if your very unlucky).

Cleanup and preparation of area

When the old capacitors are removed it will leave behind flux but also if they have leaked there will also be dried electrolyte on the board (you will smell a fishy smell if capacitors have leaked when removing) so the area is fully cleaned up with flux remover, IPA and then deionized water.

Replace using Panasonic capacitors

Yes I only use Panasonic capacitors, there are other makes like but thats my personal preference.

Retest (Video, Audio, Floppy Boot, CF Card boot, Mouse and Joystick port)

When retesting I plug in a floppy drive and a CF card to make sure the Amiga boots from both, I then test the sound from a selection of my favorite games (Cannon fodder, Chaos Engine or Micro machines) as I know what these should sound like and what channel the samples come from. I don’t charge extra for testing your board if I get into a game!

Just some of the feedback:

Thank you for recapping my Amiga CD32, I was delighted with your workmanship!

Amazing service, wasn’t it is!! Job well done.Thanks will use again.

Superb clean & tidy recapping service! And quick return! Highly recommended!!